ETA 2750 Clickspring Ebauches # 430
Also works for ETA 2801-1, ETA 2801-2, ETA 2804-1, and ETA 2804-2

   Clickspring Ebauches #430 For ETA 2836, 2836-2, 2846, 2824, 2824-2

   Clickspring Ebauches #430 ETA 2836, 2836-2, 2846, 2824, 2824-2 pkg. of 3

   Mainspring Barrel & Cover for ETA 2836, 2836-2 & 2846

   Stem for ETA 2801-2, 2804-2, 2824-2, 2836-2 & 2846
Also for ETA 2821-2, 2824-A2, 2834-2, 2840, 2842, 2846

   Mainspring for Automatic Movement ETA 2836-2 & More
2821, 2821-1, 2821-2, 2821R, 2822, 2824, 2824-1, 2824-2, 2824-A2, 2824R, 2825, 2825R, 2826, 2826R, 2827, 2827R, 2830, 2830R, 2831, 2831R, 2832, 2832R, 2834-1, 2834-2, 2834R, 2836, 2836-1, 2836-2, 2837, 2838, 2839.

   Standard Balance Complete Found in ETA 2801-2, 2804, 2836-2 & More Sold Without Balance Bridge

   
Balance Complete Used In The ETA 2836-2, Sold With Balance Bridge Attached
This is the Balance Complete #721 found on the ETA 2836-2 with the balance attached to the Balance Bridge #121
2836-721-121

  Standard Balance Complete Found in ETA 2801-2, 2804, Sold With Balance Bridge Attached
This is the Balance Complete #721 Attached to the Balance Bridge #121

   Balance Complete Used In The ETA 2836-2, Sold With Balance Bridge Attached Gold Plated
This is the Balance Complete #721 found on the ETA 2836-2 with the balance attached to the Balance Bridge #121

   Standard Balance Complete Found in ETA 2801-2, 2804, Sold With Balance Bridge Attached Gold Plated
This is the Balance Complete #721 Attached to the Balance Bridge #121

   ETA 2801-2 ,Hour Wheel, SS HT 1.26
Normal height for ETA 2801-2

  ETA 2801-2 Cannon Pinion, SS HT 2.20
This is the normal height for the ETA 2801-2, however you can also use the 2.7 mm height below, which is the normal height for the ETA 2836-2.

   ETA 2801-2 Fourth Wheel, SS HT 5.05
This is the standard height for the ETA 2801-2, while 5 other heights are available. Found on the ETA 2801, 2801-1, ETA 2801-2, 2804, 2804-1

ETA 2836-2 Fourth Wheel, SS Ht 5.55
Standard for the ETA 2836-2 and can be used with the ETA 2801, 2801-1, 2801-2, 2804, 2804-1, 2804-2.

   ETA 2836-2 & 2879 Cannon Pinion, SS HT 2.70
This is the normal height 2.7 mm for the ETA 2836-2, 2879, however it can also be use on the ETA 2801-2.

   ETA 2801-2 Pallet Fork & Arbor
Work also for 2836-2 and many other calibers.

   ETA 2801-2 Pallet Arbor
This part fits the ETA 2836-2

   Barrel Arbor ETA 2801-2, 2804-2 and 2836-2
Fits many popular ETA calibers
2800, 2801, 2801-1, 2801-2, 2803, 2804, 2804-1, 2804-2, 2805, 2806, 2807, 2808, 2809, 2810, 2812, 2813. 2816, 2816-1, 2817, 2819, 2820, 2821, 2821-1, 2821-2, 2821R, 2822, 2824, 2824-1, 2824-2, 2824-A2, 2824R, 2825, 2825R, 2826, 2826R, 2827, 2827R, 2830, 2830R, 2831, 2831R, 2832, 2832R, 2834-1, 2834-2, 2834R, 2836, 2836-1, 2836-2, 2837, 2838, 2839.

   Escape Wheel ETA 2801-2, 2804-2, 2836-2 and many more calibers.
Fits many popular ETA calibers
2800, 2801, 2801-1, 2801-2, 2803, 2804, 2804-1, 2804-2, 2805, 2806, 2807, 2808, 2809, 2810, 2812, 2813. 2816, 2816-1, 2817, 2819, 2820, 2821, 2821-1, 2821-2, 2821R, 2822, 2824, 2824-1, 2824-2, 2824-A2, 2824R, 2825, 2825R, 2826, 2826R, 2827, 2827R, 2830, 2830R, 2831, 2831R, 2832, 2832R, 2834-1, 2834-2, 2834R, 2836, 2836-1, 2836-2, 2837, 2838, 2839.

   Clutch Lever Ebauches Part # 435 for ETA 2836, 2836-2, 2846, 2801-2, 2804-2, 2824-2
For ETA 2801-1, 2821-2, 2804-1, 2804-2, 2816-1, 2821-1, 2821-2, 2824-1, 2824-2, 2824-A2, 2834-1, 2834-2, 2836-1, 2836-2, 2846

   Ebauches # 2557/1 Date Dial @3 for ETA 2804
Used on ETA 2802, 2804, 2804-2, 2807, 2822, 2822R, 2824, 2824-1, 2824-2, 2826, 2892, 2892-2, 2892-A2

   Ebauches # 2557/1 Date Dial @3 for ETA 2804 Black Background White #'s
Used on ETA 2802, 2804, 2804-2, 2807, 2822, 2822R, 2824, 2824-1, 2824-2, 2826, 2892, 2892-2, 2892-A2

   Ebauches # 2557/1 Date Dial @3 for ETA 2804 Black Background Gold #'s
Used on ETA 2802, 2804, 2804-2, 2807, 2822, 2822R, 2824, 2824-1, 2824-2, 2826, 2892, 2892-2, 2892-A2

   Ebauches # 2557/1 Date Dial for ETA 2836 & 2879
Used on ETA 2816, 2816-1, 2817, 2836, 2836-1, 2836-2, 2846, 2852, 2853, 2859, 2879

  ETA 2801-2 & 2836-2 Part #2570
Double corrector operating lever Ebauches number 2570 found in the ETA 2801-2 is also used in ETA's 2804-2, 2821-2, 2824-2, 2824-A2, 2834-2, 2836-2, 2846 and

   Mainspring For ETA 2801, 2801-1, 2801-2, 2804, 2804-1, 2804-2
Also for ETA 2805, 2806, 2807, 2810, 2811, 2812, 2813, 2816, 2816-1, 2817, 2819,

  Stem For 2801-1, 2804-1, 2836-1

  ETA 2801-2 Screw For # 5105 Barrel Bridge

   ETA 2801-2 Screw For # 5110 Train wheel Bridge
5110/753

   ETA 2801-2 Screw For # 5121 Balance Bridge
Also used on these ETA Calibers:
2600, 2602, 2603, 2608, 2609, 2801-1, 2801-2, 2804-1, 2804-2, 2816-1, 2821-1. 2821-2. 2824-1, 2824-2, 2824-A2, 2834-1, 2834-2, 2836-1, 2836-2.

   ETA 2801-2 Screw For # 5125 Pallet Bridge

   ETA 2801-2 Screw For # 5415 Ratchet Wheel
2800, 2801, 2801-1, 2801-2, 2802, 2803, 2804, 2804-1, 2804-2, 2805, 2806, 2807, 2808, 2809, 2810, 2812, 2813, 2816-1, 2817, 2819

   ETA 2801-2 Screw For # 5420 Crown Wheel
Also used on these ETA Calibers:
ETA 1260, 1270, 2340, 2345, 2350, 2390, 2390-2391, 2391, 2408, 2409, 2801-1, 2801-2, 2804-1, 2804-2,2816-1

   ETA 2801-2 Screw For # 5445 Set Bridge

   ETA 2801-2 Screw For # 5462 Minute Work Cock

   WM-A/7071
Ebauches Part #9433 Balance Stop Lever (Slang term Hack)
Balance Stop Lever is also called a hack lever, the official Swiss Ebauches part number is 9433. The same stop lever found in the ETA 2801-2 also works in these ETA calibers 2724, 2724R, 2728, 2728R, 2764, 2766, 2784, 2784R, 2790/1, 2790/1R, 2791, 2801-1, 2804, 2804-1, 2804-2, 2805, 2810, 2811, 2816, 2821-1, 2821-2, 2824, 2824-1, 2824-2, 2824-A2, 2825, 2825R, 2830, 2831, 2831R, 2834, 2834-1, 2834-2, 2834R, 2836, 2836-1, 2836-2

   ETA 2801-2 Barrel Bridge Part #105

   ETA 2801-2 Train Bridge Part #110

Ebauches Part Number 2780 "Gib, or Date Dial Clip" For the ETA 2836-2 & 2879
Ebauches Part #2780
Call it a Gib for Day Disk (Day indicator spring-clip) or Date Dial Clip or refer to it by the Ebauches part number 2780.

Works in following calibers:
ETA 2769-1, 2789, 2789-1, 2790/1, 2790/1R, 2798, 2816-1, 2834, 2834-1, 2834-2, 2836, 3826-1, 2836-2, 2836R, 2837, 2837R, 2838, 2838R, 2846, 2858, 2859, 2878, 2879
ESA 536.121, 554.121, 9362, 944.121, 944.131, 947.131, 952.121, 954.121, 945.122

   Case Clamp To Fit
Calibers:ETA 2377, 2503, 2609, 2803, 2805, 2809, 2811, 2813, 2823, 2825, 2827, 2829, 2831, 2834-1, 2834-2, 2836-2, 2836R

   ETA 2801-2 Set Wheel, Ebauches #450
The same set wheel found in the ETA 2801-2 also works in these ETA calibers:
ETA 2804-1, 2804-2, 2816-1, 2821-1, 2821-2, 2824-1, 2824-2, 2824-A2, 2834-1, 2834-2, 2836-1, 2836-2, 2846, 2850, 2851, 2852, 2853, 2858, 2859, 2870, 2871, 2872, 2873, 2879

   Clutch Wheel for ETA 2801-2, 2836-2, 2804-2
Also for ETA 2821-2, 2824-2, 2834-2, 2846

   SS 4th Wheel Ebauches # 227 For ETA 2801-2 HT. 5.05 MM

   Set Lever with Axle For ETA 2836-2 & More Calibers
ETA 28,800 ETA Set lever to fit these popular calibers.
ETA: 2801-1, 2801-2, 2804-1, 2804-2, 2816-1, 2821-1, 2821-2, 2824-1, 2824-2, 2824-A2, 2834-1, 2834-2, 2836-1, 2836-2

   Set Bridge For ETA 2836-2 & More Calibers\

ETA Set lever to fit these popular calibers. Is needed to convert a 2801-2 to a 2804-2

ETA: 2804-1, 2804-2, 2816-1, 2824-1, 2824-2, 2824-A2, 2834-1, 2834-2, 2836-1, 2836-2, 2846

   Set Bridge For ETA 2801-2 & More Calibers

   ETA 2801-2 And ETA 2836-2 Third Wheel #210

   Day Dial for ETA 2836-2 & 2879

   Crown Wheel For ETA 2801-2, 2804-2

  Crown Wheel Ring For ETA 2801-2 and 2804-2
Fits many popular ETA calibers
2500, 2502, 2503, 2517, 2600, 2602, 2603, 2608, 2800, 2801, 2801-1, 2801-2, 2803, 2804, 2804-1, 2804-2, 2805, 2806, 2807, 2808, 2809, 2810, 2812, 2813, 2816, 2816-1, 2817, 2819

   Automatic Weight Ebauches # 1143 for Movement ETA 2824-2, 2836-2 & More
For for automatic movements used by ETA, Benrus, Bulova, Hamilton, Longines, Lucien Picard, Movado and Tissot.

ETA Caliber's 2821, 2821-1, 2821-2, 2821R, 2822, 2824, 2824-1, 2824-2, 2824-A2, 2824R, 2825, 2825R, 2826, 2826R, 2827, 2827R, 2830, 2830R, 2831, 2831R, 2832, 2832R, 2834-1, 2834-2, 2834R, 2836, 2836-1, 2836-2, 2837, 2838, 2839.

   ETA 2836-2 Framework For Automatic Device With Wheels & Bridge Attached ETA-2879-1134-1141

  Pawl Winding Wheel Ebauches #1488 For ETA 2836, 2836-2, 2846, 2824.

   ETA 2836-2 & 2879 Screw For Day Corrector Star

  ETA 2836-2 & 2879 Double Jumper

   ETA 2836-2 & 2879 Minute Cock

ETA 2836-2 & 2879 Hour Wheel Ht. 1.76 mm

   ETA 2836-2 & 2879 Minute Wheel
Same Minute Wheel is also used in ETA 2801-2, 2824-2, 2836-2, 2879

   ETA 2836-2 & 2879 Double Corrector Wheel
Also used in ETA 2824-2

   ETA 2801-1, 2824-1, 2824-2, 2836-1 & 2879 Double Corrector Operating Lever
The 2801-2, 2804-2 and 2836-2 take a different one part number A/9202

   ETA 2836-2 & 2879 Unlock Yoke Plate

   ETA 2836-2 & 2879 Unlock Yoke Spring

   ETA 2836-2 & 2879 Unlock Yoke A/8230

   ETA 2836-2 & 2879 Date Drive Wheel
Also for 2824-2

   ETA 2824-2, 2836-2, 2879 Ratchet Wheel Ebauches # 415

   ETA 2824-2, 2836-2, 2879 Screw For # 5415 Ratchet Wheel
5415/638

ETA 2836-2 & 2879 Intermediate Date Wheel

   ETA 2836-2 & 2879 Day Corrector Star

   Main Plate For ETA 2836-2 Ebauches #100

   Main Plate For ETA 2801-2 Ebauches #100

All the spares listed above are in stock and ready for shipping. You can make the payment by Paypal. My Account email address is ksudarson@gmail.com. Complete movement is available for sale as well.