Parts for ST 96

Standard ST 96 watch movementsStandard ST 96 watch movement

Standard ST 96 watch spare parts

  • Standard ST 96
  • manual wind
  • sweep second
  • 11.5”’, Dm= 25.60mm
  • H= 4.50mm
  • 17 jewels
  • f = 18000 A/h
  • power reserve 48h

Parts for ST 96

  ST 96 & ST/FHF 97 CROWN WHEEL
The same crown wheel is used by all the Standard (ST) and Font FHF listed here. Calibers, 96, 96-4, 97, 969, 969-4, 974.
   ST 96 & ST/FHF 97 CROWN WHEEL RING
The same crown wheel ring is used by all the Standard (ST) and Font FHF listed here. Calibers, 96, 96-4, 97, 969, 969-4, 974.
   ST 96 & ST/FHF 97 PALLET FORK & ARBOR
The same pallet fork & arbor is used by all the Standard (ST) and Font FHF listed here. Calibers, 96, 96-4, 97, 969, 969-4, 974.
   ST 96 & ST/FHF 97 SET WHEEL
The same set wheel is used by all the Standard (ST) and Font FHF listed here. Calibers, 96, 96-4, 97, 969, 969-4, 974.
   St 96 Barrel Arrbor
   ST 96 Barrel
   ST 96 Click
   ST 96 Clickspring
   ST 96 Clutch Lever
   ST 96 Clutch Wheel
407/781
Same Clutch Wheel Used in the ST 97
FHF ST 969, 969N, 96N, 974, 96-4, 969-4N
   703/187
ST 96 Escape Wheel S/C, Fits ST969, ST 969N, ST969-4N
The pivots on Escape wheels are available different ways depending on the exact make of of the watch movement. Escape wheels pivots are called “S/C” and are Ebauches #703 is given when the the watch movement has jap jewel on only the lower side. Most of the ST96, ST969N and ST969-4N movements have had cap jewels on the lower side only with a hole jewel on the upper side.
   ST 96 Escape Wheel C/C
The pivots on Escape wheels are available different ways depending on the exact make of of the watch movement. Escape wheels pivots are called “C/C” and are Ebauches #702 is given when the the watch movement has cap jewels (also called endstones) on both the upper (balance side) as well as on the lower (dial) side.
ST 96 Minute Cock
   ST 96 Minute Wheel
Same part used in ST 97
   ST 96 Ratchet Wheel
   ST 96 & ST/FHF 97 WINDING PINION
The same winding pinion is used by all the Standard (ST) and Font FHF listed here. Calibers, 96, 96-4, 97, 969, 969-4, 974.
ST 96 Set Bridge
ST 96 Set Lever w/axle
  ST 96 Set Spring
ST 96 Third Wheel
ST 96, SS Can Pinion HT. 2.02
ST 96, SS Center Wheel
ST 96, SS Fourth Wheel Ht. 6.18
Fits Calibers: FHF ST 96, 96-4, 969, 969-4, 96N, 969N, 969-4N
Ht. 6.18 mm 4th Wheel is used with 2.02 mm cannon pinion
   ST/FHF 96 HOUR WHEEL, SS HT 1.30
The Standard 96 or Font 96 (FHF96) hour wheel can be used on the ST 97, however the hand hole size of the ST96 is 1.30 mm, while those used on the ST97 are 1.50 mm.
  Set Bridge & Set Spring Combo For ST969N, 969-4N
Found on Car 11OFC, FHF ST 96N, 969N, 969-4N
   CLICK & SPRING COMBO For ST969N, 969-4N
This is used on all the calibers FHF ST 96N, 96-4, 96-4N, 969-N, 969-4N

You can confirm the order by making a PayPal payment. My account email address is oldswisswatches@gmail.com

Watch Parts Enquiry

* If you are unable to fill out any of the required information fields, please type “N/A”.

Stem, Crown, Hands & Spares might be available for this movement.

Email us for rate and availability: ksudarson@gmail.com

Mobile/WhatsApp: +91- 9841 360 340